This tyre tube cold patch is a self-repairing kit. It can be used during emergency should you hit something sharp. Also can be used for DIY at home.

Usage instruction:
1. Deflate and thoroughly clean the tube repair area. Make sure the outside of the tube is dry.
2. Using sandpaper buff the tube around the area of the hole to remove the outer surface of the rubber revealing fresh rubber underneath. Make sure to buff at least as large an area as the whole patch will cover. Apply coating of rubber solution to the buffed area and allow it to dry.
3. Let the solution dry fully! Really this kind of solution, also called contact cement, must dry completely before applying to the patch. Peel the foil or the plastic backing off the patch.
4. Press it firmly on the solution area. Do not touch the side of the patch which sticks to the glue because even the microscopic amount of material on your fingers deactivates its stickiness.
5. Use roller bearing to roll and cross on the patch to let it stick fast.

Patch size: 2.5 x 1.5 cm
Product consists of 48 patches and 1 tube of rubber solution, with howei exclusively addon a sandpaper.